Vinyl Weatherboards Installation Procedures Dos and Don’ts

You may have the best home interior but without vinyl weatherboards to project a cosy and protected ambiance, then your home may still be facing deterioration a lot sooner. Many homeowners have been choosing vinyl as their primary cladding for durable and cost-effective wall support – you must be also thinking of getting the material for your own home. But before you even pick out that money for purchase, here are some tips and suggestions for an effective installation of vinyl weatherboards. Don’t ignore these advices as they can be your only way to ensure a first-class finish on your outside apart from guaranteed protection and durability. 

1. Store your weatherboards on a clean, dry and flat ground.

Right after making the order and the weatherboards delivered into your home, it is important to secure a place that’s clean, dry and flat to keep them overnight. If possible, secure a place that’s totally away from the sunlight. Cut the edges of the packaging to allow the boards to breathe and to prevent the build up of possible moisture. 

2. Make sure that you are using the right tools.

Corrosive-resistant nails and screws with large head must be used. They are very effective in keeping the weatherboards in place without the problems on rusting.  Do not screw or fix too tightly – this can damage the boards especially vinyl. Provide an expansion space and prevent the common problem of buckling with the use of rollover nailing strip as a hammer. This tool also avoids tight fixing. 

3. Overlapping is a must to prevent water seepage.

Leak prevention is important with vinyl cladding. You must have to design the panels in overlapping manner to guard against gaps that cause the water to enter. The utility trim is a very common use around windows and doors to prevent the entry of water. The trim pieces should be setup snugly into the frame for extra security and should show neat corners so the surface would still look pleasant while giving out strong protection. 

You must have to use the middle of the nailing slot with the help of a screw to allow the movements. If there are extra slots needed, the nail-hole punch can make way through this. If you are dealing with horizontal boards, you may want to set-up a floating overlap joint for effective expansion. However, you must have to ensure that joints are not sealed with just glue or silicone – they won’t be enough. 

These are just some of the best techniques you must learn to apply in your installation of vinyl weatherboards.  There’s still a lot more from Vinyl Cladding Professionals but you need to visit the website to get straight to their installers. There, you’ll find a lot more than you thought. For your questions and other suggestions, contact the company link.